Контактор (группа IEK)
Circuit breaker 3p 160A VA04-36-341130-20 UHL3 660V Contactor 1015631 Contactor (IEK group)
SKU: 1015631
ETIM: EC000228
44565 ₽
Preorder
Выключатели предназначены для проведения тока в нормальном режиме и отключения тока при коротких замыканиях, перегрузках, а также для нечастых оперативных включений и отключений электрических цепей и рассчитаны для эксплуатации в электроустановках с номинальным напряжением до 660 В переменного тока частоты 50, 60 Гц и до 220 В постоянного тока. Включены в реестр Минпромторга.
| Additional equipment possible | Yes |
| Built-in ground fault protection | No |
| Mounting installation depth | 44 мм |
| Number of auxiliary NO contacts | 0 |
| Number of auxiliary break contacts | 0 |
| Number of poles | 3 |
| Design | Complete unit in enclosure |
| Rated breaking capacity in accordance with EN 60898 | 6 кА |
| Rated ultimate breaking capacity (Icw) | 10 кА |
| Rated ultimate short-circuit breaking capacity Icu at 400 V, 50 Hz | 20 кА |
| Rated impulse voltage | 4 кВ |
| Rated voltage | 230 В |
| Rated insulation voltage Ui | 250 В |
| Rated current | 80 А |
| Rated continuous current Iu | 160 А |
| Rated leakage current | 30 мА |
| Suitable for DIN-rail mounting | No |
| Ambient operating temperature to | 60 град.C |
| Ambient operating temperature from | -25 град.C |
| With short-time delayed tripping | No |
| With interlock device | Yes |
| Selective protection | No |
| Flexible stranded conductor cross-section up to | 35 кв.мм |
| Stranded flexible conductor cross-section from | .75 кв.мм |
| Solid conductor cross-section to | 50 кв.мм |
| Solid conductor cross-section from | .75 кв.мм |
| Mounting method | DIN rail |
| Pollution degree (number) | 2 |
| IP protection rating | IP20 |
| Installation size (in accordance with DIN 43880) | 1 |
| Residual current type | A |
| Resistance to current surges | .25 кА |
| Frequency (Hz) | 50 Hz |
| Width in modular units | 2 |
0
★★★★★
0 reviews
No reviews yet. Be the first!
